The cost of the fuel supply system, the cost of processing, assembling, and so on, can greatly reduce the cost of manufacturing.
2.Operation cost reduction
Greatly reduce the use of lubricating oil and equipment maintenance costs, but also exempt from the risk caused by the shortage of oil.
3.design time shortened
No oil can make the design, structure is greatly simplified, reduce costs, save design time. In addition, using self-lubricating bearings can also improve the mechanical properties and prolong get remarkable results using life and improve the reliability.
4.recovery and environmental protection of lubricant
No need to waste oil recycling, is conducive to environmental protection.
EB65 self lubricated bearings as the mechanical industry parts, there is a certain sense of the use of. In order to make the machine run normally, a lot of effort. The bearing is divided into rolling bearing and sliding bearing. The general sliding bearing in high load movement, mixed with foreign body, temperature, fuel, maintenance maintenance is not perfect circumstances, will cause galling. Like that of sliding bearing is not able to use harsh conditions, metal inlaid solid self lubricating bearing wear resistance nap, play due to the performance of bearings, mechanical performance and free maintenance.
2.Please note that there is no foreign body in the assembly;
3.After using the sliding surface, formed by solid lubricant oil film in surface with black or gray black phenomenon, please do not scrub, as usual.
4.Before the assembly, if the lubricating oil applied to the grinding parts, can shorten the running in period, conducive to the operation of machinery, operation;
5.When the assembly should be slowly pressed into, it is strictly forbidden to beat, so as to avoid damage to the bearing and deformation;
6.Design, different parts should be selected with appropriate material, in order to improve the mechanical performance, to extend the service life of the bearing;
7.In the high load, reciprocating motion, the proposed use of screw fixation;
8.In fresh water, sea water and in the sea, on the use of stainless steel or surface plating.
& Chemical Compositions
|Cast Iron HT250
|1.9·10 -5 /℃||1.9·10 -5 /℃||1.8·10 -5 /℃||1.6·10 -5 /℃||1.8·10 -5 /℃||1.0·10 -5 /℃|
|Max. Load N/mm 2||100||80||60||50||70||10|
|Max. Speed m/min||15||15||10||20||10||15|
|Max. PV N/mm2·m/min||200||200||200||200||200||40|
Friction of coe. Oil 0.03; Dry 0.16
|High-load, low speed, general use|
|Super high load, low-speed, high
|Medium load, medium-speed,
|Medium load, medium-speed|
|Solid Lubricant||Features||Typical application|
|SSL1(PTFE etc + Add)||Excellent resistance against chemical attacks
and low friction. Temp limit 400℃
|Suite for general machines and under
|SL2(PTFE etc + Add2)||Lowest in friction and good of water
|Ship, hydraulic turbine, gas turbine etc.|